Specifications

Chapter 5: Wiring Diagrams
5-23
MCU PWB, Exit Sensor, Registration Sensor, and the MBF Sensor
The following table provides information on the signal names used in this section.
Signal Name Description
Exit Sensor ON(L) 5VDC Signal for monitoring paper at the Exit Sensor.
(L) = no paper at the sensor.
(H) = paper at the sensor.
Registration sensor (ON(L) 5VDC
Signal for monitoring paper at the inlet chute.
(L) = no paper at the sesor.
(H) = paper at the sensor.
MBF Sensor ON(L) 5VDC Signal for monitoring paper at the Front Tray Assembly.
(L) = no paper at the sensor.
(H) = paper at the sensor.
Note: Resistance between the LVPS and the MCU PWB reduces voltage to the sensors to
approximately 1.2VDC.