Specifications

Chapter 5: Wiring Diagrams
5-17
MCU PWB, Feeder PWB, Feeder PWB AUX, Feed Solenoid, and the Turn Solenoid
NOTE: Lines with signal names beginning with [1] are connected to Tray 1.
Lines with signal names beginning with [2] are connected to Tray 2.
The line with the signal name PAPER SIZE carries data for the Paper Size Switches
The FEED SOLENOID has a resistance of 120 ohms ±10% at 20°C
The TURN SOLENOID has a resistance of 220 ohms ±10% at 20°C
The following table provides information on the Paper Size Switches. 0 is OFF. 1 is ON
Sheet Size SW1 SW2 SW3 SW4 HEX number
Signal Voltage
No Tray installed 00(00~07)
0.0 VDC
No Cassette installed 0 0 0 0 0F(08~15)
0.275~0.293 VDC
MONARCH 0 0 0 1 1E(16~24)
0.554~0.583 VDC
LEGAL 13" 0 0 1 0 2C(25~32)
0.834~0.871 VDC
POSTCARD 0 0 1 1 3B (33~41)
1.116~1.157 VDC
COM10 0 1 0 0 49 (42~4F)
1.396~1.445 VDC
A4 (SEF) 0 1 0 1 58 (50~5E)
1.680~1.730 VDC
C5 0 1 1 0 66 (5F~6D)
1.962~2.015 VDC
DL 0 1 1 1 75 (6E~7B)
2.248~2.298 VDC
EXECUTIVE (SEF) 1 0 0 0 83 (7C~8A)
2.530~2.584 VDC
B5(SEF) 1 0 0 1 91 (8B~98)
2.814~2.868 VDC
LEGAL 14" 1 0 1 0 A0(99~A7)
3.098~3.152 VDC
1 0 1 1 AE(A8~B5)
3.385~3.433 VDC
1 1 0 0 BD(B6~C4)
3.671~3.715 VDC
LETTER (SEF) 1 1 0 1 CB(C5~D3)
3.959~3.996 VDC
1 1 1 0 D9(D4~E1)
4.247~4.276 VDC
A5(SEF) 1 1 1 1 E8(E2~FF)
4.537~4.554 VDC