Specifications

Chapter 5: Wiring Diagrams
5-8
Diagram blocks
The Master Connection and Wiring Diagram is divided into ten individual blocks to better illustrate
the electrical relationship between components and assemblies within the printer.
LVPS Assembly and MCU PWB
The connections between the Low Voltage Power Supply Assembly and the MCU PWB
LVPS Assembly and the Fuser Assembly
The connections between the Low Voltage Power Supply Assembly and the Fuser Assembly
MCU PWB and the ROS Assembly
The connections between the MCU Assembly and the ROS Assembly
MCU PWB, Feeder PWB, Feeder PWB AUX, Feed Solenoid, and the Turn Solenoid
The connections between the MCU PWB and the Feeder PWB
The connections between the Feeder PWB and the Feeder PWB AUX
The connections between the Feeder PWB and the Feeder Solenoid
The connections between the Feeder PWB and the Turn Solenoid
The connections between the Feeder PWB AUX and the Feed Solenoid
The connections between the Feeder PWB AUX and the Turn Solenoid
MCU PWB and the Drive Assembly
The connections between the MCU PWB and the Drive Assembly
MCU PWB, HVPS, Earth Plate Assembly, Transportation Chute Assembly, Inlet Chute
Assembly, MCU PWB, and the CRU Sensor PWB
The connections between the MCU PWB and the High Voltage Power
Supply
The connections between the HVPS and the Earth Plate Assembly
The connections between the HVPS and the Transportation Chute Assembly
The connections between the HVPS and the Inlet Chute Assembly
The connections between the Transportation Chute Assembly and the BTR
Assembly
The connections between the MCU PWB and the CRU Sensor PWB
MCU PWB, Exit Sensor, Registration Sensor, and the MBF Sensor
The connections between the MCU PWB and the Exit Sensor
The connections between the MCU PWB and the Registration Sensor
The connections between the MCU PWB and the MBF Sensor