Installation guide

. . . . . . . . . . . . . . . . . . . . . . . .

190287-001 - 06/01/95 - - Saved by IDC - -

Rev # 2 - File Name EXFX_US6.DOC

Approval Information for Australia

Failure to set the modem, and any communications software

used with the modem, to the values contained in the following

table, will result in the modem being operated in a non-

compliant manner. Consequently, there would be no permit in

force for this equipment and the Telecommunications Act 1991

prescribes a penalty of $12 000 for the connection of non-

permitted equipment.

S-Register Function Default Permitte

d Range

Units

S0 Number of rings to answer 2 1 to 4 Rings

S6 Blind dial wait time 4 2 to 4 Seconds

S7 Wait for carrier time 55 4 to 55 Seconds

S10 Loss of carrier disc. 14 0 to 30 Seconds

PTT Approval Information For Holland

The DEClaserFAX is made in England and is approved in

Holland for connection to the general switched telephone

network, either directly or through an approved PABX. Users

with modem line connections to some types of PABX or

switched network exchanges must be aware that such equipment

may take between 5 and 40 seconds to return a dial tone after

the DEClaserFAX seizes the line.

Due to PTT approval or other statutory requirements, the

following differences exist in the operation of the

DEClaserFAX when configured for use in Holland and the

standard UK configuration:

•

Blind dialling

Dialling in the absence of a dial tone is not permitted.

Therefore, the X options that cause the DEClaserFAX to

ignore the dial tone, X0 and X3, are disabled.

•

Comma pause

dial string is ignored. Therefore, the "," option (the comma

character) that inserts a pause during dialling is not

permitted.