Installation guide

Table A–1 (Cont.): Cables and Adapters for Communication
Connections
Connector Type
Adapter and Cable
Required
Connecting
Instructions
9-Pin Plug Hosts
(IBM PC/AT Type)
DECstation 210, 212
DECstation 316, 320
IBM PC/AT
H8571–J and
H8571–E
1
and BC16E
1
Attach the H8571–J adapter
to one of these hosts, then
connect one end of the BC16E
cable to the H8571–J. Attach
the H8571–E adapter to the
DEClaser printer, then con-
nect the other end of the BC16E
cable to the H8571–E. Use data
transmit ready (DTR) flow con-
trol. Refer to the DEClaser
1100 Printer Operator’s Guide.
European DECstations
Serial Port
200 Series 12–27591–01
Extender and
H8571–A and
H8571–E
1
and BC16E
1
Connect the female socket of
the extender cable to the host
and the male plug of the ex-
tender cable to the H8571–A.
Attach the H8571–E adapter
to the DEClaser printer, then
connect one end of the BC16E
to the H8571–A and the other
end of the BC16E cable to the
H8571–E.
300, 350 Series H8571–A and
H8571–E
1
and BC16E
1
Attach the H8571–A adapter
to one of these hosts, then
connect one end of the BC16E
cable to the H8571–A. Attach
the H8571–E adapter to the
DEClaser printer, then con-
nect the other end of the BC16E
cable to the H8571–E.
European DECstations
Parallel Port
1
H8571–E and BC16E (DECconnect cable) are included with the DEClaser 1100 printer.
Cabling Information A–3