Installation guide

5.2 Turning the Printer Power On
The following instructions show how to turn the printer power on.
1. Press the power switch to the ON ( |) position.
2. Confirm that the control panel indicators and the message display
operate properly as indicated by the following three items:
mlo-005820
— All indicators light for a moment.
— The Ready indicator flashes and the message display reads:
02 WARMING UP
— The Ready and the On Line indicators light and the message display
reads:
00 READY DEC
If your printer did not power on as described above, refer to the
troubleshooting section of the DEClaser 1100 Printer Operator’s Guide.
5.3 Producing the Printer Configuration Data Sheet
The following instructions show how to print the data sheet containing the
default values of this printer.
1. Press
On Line
to place the printer in the offline state.
— The On Line indicator goes off.
2. Press
Test/Font
.
— 05 TEST PRINT A appears on the display, and the following test
image prints.
5–6 Installation Guide