User guide

Rev 1.00 16 900.0557
03/06
Sync Control Setup
To synchronize the vertical interval sync pulse of your camera with
other equipment to reduce the effect of picture roll on the monitor.
Figure 14 Sync Control Setup
Restore Factory Default Settings
To reload the factory default settings on the camera.
Figure 15 Restoring Default Settings
Menu Item Description
INTERNAL When line lock is not required.
LINELOCK Adjust the proper phase:
V.PH: 000 – 300 (factory default is 0)
RETURN Press MENU to return to the SETUP MENU.
Menu Item Description
RESTORE Press MENU to Reload the factory default camera
settings.
This action replaces all user-defined settings.
RETURN Press MENU to return to the SETUP MENU.
<SYNC. CONTROL>
SYNC MODE: AUTO
INTERNAL
RETURN
<RESTORE DEFAULT>
RESTORE FACTORY SETTING
RETURN