User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
3–34 SROM Mini-Debugger Command Set
User Commands
SROM> em
A> 500000
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
00000000.00500000: 12345678
! (key pressed)
The mt command continuously checks the range between 400000 and 500000.
SROM> wa
Wrt Addr ON
SROM> mt
A> 400000
A> 500000
!(key pressed)