User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
3–30 SROM Mini-Debugger Command Set
User Commands
SROM> fw ! Follow with a write (before the read).
FollowWr ON
SROM> fr
! Follow deposit command with a read.
FollowRd ON
SROM> fm
A> 500000
! Begin to write at this address
A> 500020
! and end with this one.
A> 600000
! Write to this address range after each
! write from first block.
00000000.00500000: 00500000 ! Reads from first block.
00000000.00500004: 00500004
00000000.00500008: 00500008
00000000.0050000c: 0050000c
00000000.00500010: 00500010
00000000.00500014: 00500014
00000000.00500018: 00500018
00000000.0050001c: 0050001c