User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
viii
Content Overview
The information in this document is organized as follows:
• Chapter 1 is a general overview of the mini-debugger.
• Chapter 2 describes how to set up and start the mini-debugger.
• Chapter 3 describes the mini-debugger command set.
• Appendix A contains information about technical support services, products, and
associated documentation.
Conventions
The following conventions are used in this document:
Convention Meaning
A percent sign (%)
Indicates a DIGITAL UNIX operating system command
prompt.
SROM>
Indicates an Alpha Microprocessors SROM Mini-Debugger
prompt.
Boldface type
Indicates an Alpha Microprocessors SROM Mini-Debugger
command keyword.
Italic type Indicates special emphasis or the title of a manual.
Monospaced type
Indicates an operating system command, a file name, or a
directory path name.
Underlined text
Indicates user input in an example.
Note Provides general information.