User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
vii
Preface
Introduction
This document describes how to use the Alpha Microprocessors SROM
Mini-Debugger (also referred to as the mini-debugger) to debug hardware with one
of the following evaluation boards:
• The AlphaPC 164LX Motherboard (AlphaPC 164LX)
• The AlphaPC 164 Motherboard (AlphaPC 164)
• The Alpha 21164 Evaluation Board (EB164)
• The AlphaPC 64 Motherboard (AlphaPC 64)
• The Alpha 21066A Evaluation Board (EB66+)
• The Alpha 21064 and 21064A PCI Evaluation Board (EB64+)
• The Alpha 21066 and 21068 Evaluation Board (EB66)
• The Alpha 21064 Evaluation Board (EB64)
Audience
This document is intended for anyone who develops hardware or software to be used
with an Alpha microprocessor.