User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
2–34 Getting Started
Sample Session on the AlphaPC 164
SROM> dm
A> 980 ! MBAE.
D> 20011
SROM> ba
00000087.50000000
BaseAddr OFF
! Perform 8 consecutive RAS cycles to “wake up” memory.
SROM> fm
A> 0
A> 4000000 ! Total memory size.
D> 0
! This may take a few seconds.
SROM> dc
! Turn on the DCache.
IPR> dcmd
D> 1
*DCMD 00000000.00000001
! The BCFG and BCTL values shown are for a 366MHz CPU, with
! 1MB Bcache. For other configurations, see table.
SROM> dc
IPR> bcfg
D> 1f21691 ! Sets the BCache timing.
*BCFG 00000000.01f21691
SROM> dc
IPR> bctl
D> 4c4008051 ! Set the BCache control.
*BCTL 00000004.c4008051