User`s guide
Table Of Contents
- Contents
- Tables
- Preface
- Introduction
- Getting Started
- 2.1 Overview
- 2.2 Hardware Required
- 2.3 Hardware Debug Features
- 2.4 Setting Up the SROM Serial Port Connection
- 2.5 Starting and Running the Mini-Debugger
- 2.6 Sample Session on the EB64
- 2.7 Sample Session on the EB64+ and the AlphaPC 6...
- 2.8 Sample Session on the EB66 and EB66+
- 2.9 Sample Session on the EB164
- 2.10 Sample Session on the AlphaPC 164
- 2.11 Sample Session on the AlphaPC 164LX
- 2.12 Onboard Machine Check Handler
- SROM Mini-Debugger Command Set
- Support, Products, and Documentation
- Index
SROM Mini-Debugger Command Set 3–45
User Commands
SROM> bm
A> 400000
A> 400020
00000000.00400000: 00400000
00000000.00400004: 00400004
00000000.00400008: 00400008
00000000.0040000c: 0040000c
00000000.00400010: 00400010
00000000.00400014: 00400014
00000000.00400018: 00400018
00000000.0040001c: 0040001c
SROM> qw
QW ON
SROM> fm
A> 800000
A> 800030
SROM> bm
A> 800000
A> 800030
00000000.00800000: 00000000.00800000
00000000.00800008: 00000000.00800008
00000000.00800010: 00000000.00800010
00000000.00800018: 00000000.00800018
00000000.00800020: 00000000.00800020
With the negate data flag enabled, the complement of the address is used instead.
SROM> qw
QW OFF
SROM> !d
Neg Data ON
SROM> fm
A> 500000
A> 500020