Installation Guide

Quick Installation Guide
Repeater Mode
AP Mode
1
This device supports: Repeater Mode, AP
Mode. You just need to
select one mode.
If you are not sure which mode to select,
please view details on Q&A part or
contact with our professional engineers
for help.
Default Parameters:
Repeater Mode: Extend existing wifi
range
AP Mode: Create a new wifi access point
for more devices
Plug the device into socket next to
your main router, wait for 15 seconds,
the wifi repeater will start up entirely.
4
Select Repeater Mode.
7
(Optional) You can change or not
change the wifi extender’s WiFi name
and password. Click OK to save the
setting.
(You can set a new wifi password for the
wifi extender, or keep same wifi
Light status after activated： : Solid on : Blinking
Default SSID: Wireless-N-c
Default IP Address: 192.168.10.1
Login Password: admin
2
Search the wifi signal named “
Wireless-N-c” and connect to it
on phone.
Setting WiFi
WLAN
Available Networks
Wireless-N-c
WiFi2
WiFi3
Add network
8
Close the browser. Open wifi list and
search the new wifi extender’s signal,
input password to access into internet.
Enjoy your network.
Power On & Enter into admin Page Repeater Mode
N300 WiFi Range Extender
2 Working Modes
3
After connected to Wireless-N-c, phone
will open the admin page automatically.
( If not opened, please manually open a
browser and type the IP address
192.168.10.1 in address bar to enter
into admin page.
User Name: admin
Password: admin
(If using computer, please manually
open a browser and type 192.168.10.1
in address bar to enter into admin page)
192.168.10.1
user Name:
Password:
Language:
Login
English
Wireless-N
admin
admin
5
The wifi extender will scan available wifi
signals automatically. Please select the
wifi signal that you want to extend.
(If you want to extend a hidden network,
please click Manual Setup and manually
input your hidden wifi information).
6
Please correctly input your
extend-needed wifi’s password, the wifi
signal that you selected in step 5.
192.168.10.1
WiFi Settings
Fi
Network Settings
Management
Status
AP Mode
Repeater Mode
More Range for Wireless Network
Wireless-N
password as main wifi signal)
Setting WiFi
WLAN
Available Networks
WiFi-001-Plus
WiFi2
WiFi3
Add network
WiFi-001
192.168.10.1
More Range for Wireless Network
Please select the WiFi network to be expanded
WiFi Repeater Mode
WiFi-001
WiFi-002
WiFi-003
WiFi-004
WiFi-005
Scan AP
Back
Wireless-N
Manual Setuo
192.168.10.1
More Range for Wireless Network
Please enter” WiFi-001 ”'s Password
WiFi Repeater Mode
Next
Prev
Wireless-N
192.168.10.1
More Range for Wireless Network
WiFi Repeater Mode
Extender WiFi Name
ok
Prev
Extender password
WiFi-001-Plus
Wireless-N
Hide the name of the Extender
LAN
192.168.10.1
WiFi Settings
Fi
Network Settings
Management
Status
AP Mode
Repeater Mode
More Range for Wireless Network
Wireless-N
Step 1~3, Power On and Enter into
admin Page. Please see above
Power On part.
4
Select AP Mode
AP Mode
5
Set a wifi name and wifi
password for the wireless
access
point
OK
Back
Wireless-N-c
WiFi Name
WiFi Password
192.168.10.1
More Range for Wireless Network
AP Mode
Wireless-N
6
Connect your home modem with this
wifi extender via its LAN port
( LAN port to your home modem,
LAN LED: On or Blinking)
6
6
LAN
FQA
1. How to select a right mode?
A: 1) When you have an existing wifi but the
wifi range is not long enough, please select
Repeater Mode to cover longer range and
eliminate wifi dead zones. (Repeater mode
doesn’t need to connect Ethernet cable)
2) When you have an existing wifi router/mo -
dem and your router/modem has been
dialed, you can select AP mode to create a
wireless access point. (AP Mode needs to
connect to an Ethernet cable to your
home modem.)
2. How to factory reset it?
A: Long press the reset button for about 20
seconds till the Wireless-N-c signal becomes
open and unsecured.
network provider.
3. Why unable to open IP 192.168.10.1?
A: 1) Not connect with the network
Wireless-N-c.
2) After setting AP mode, the IP address
cannot be entered again.
3) If manually setup, the IP address was
wrongly input.
4. What if the admin page doesn’t open
automatically after connected to Wireless-N-c?
A: Please manually open the browser and type
192.168.10.1 in address bar to open admin
page.
5. Before setup, why Wireless-N-c shows No
internet connection?
A: It’s correct, because you haven’t set it up.
Please proceed the setup steps.
6. : After setup done, why no internet
connection?
A: If Repeater Mode, please check Step 6, you
might enter a wrong password. Please correct
it. If AP Mode, please check with your
7. What’s the best location to place the WiFi
Repeater?
A: 1) Put it in a signal strong area between
your home router and target room.
2)Keep it away from Bluetooth, microwave,
fridge and heavy walls, etc.
8. If you meet below issues, please reset the
device:
1) Unable to find its default SSID
2) Unable to operate in setup page
3) After set to AP mode and then need to
change setting
4) Disconnect or gets slow
5) Other unable to solve issues.
9. All electronic devices will have different
degrees of normal heating during use. The
temperature of this device during operation is
within a reasonable range, please rest assured
to use.
10.This device is using 2020 newest firmware
and no need to upgrade. If want to upgrade
it later, please contact with our service team.
Warranty Card
TECHNOLOGY SUPPORT CONTACT:
For Brand Aigital
Web: www.aigital.com
Email: [e-mail]
For Brand NETVIP
Web: www.zq-netvip.com
Email: [e-mail]
We offer 12-Months warranty for all
products against defects
in materials and quality resulting in failures
during normal use.
30 days money back guarantee for any
reason.
For RETURN, please pack up item,warranty
card, manual, box
and other accessories intact, return them
together and you
will receive a TOTAL refund for ANY reason.
At last, if you like our product, welcome to
share your experience by writing a review on
Amazon.
This user manual refers to above devices.