User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 93 -
To access the event configuration select the Event Configuration menu and then the VCA sub menu:
The external event notification will be generated every time there is at least 1 VCA alarm active.
4.4.10 Load and Save VCA Settings
It is possible to export the VCA settings from a device to an XML configuration file, and to re-load the settings
back into the device at a later date. This might be useful for demonstration purposes, where multiple detection
scenarios can be stored in separate configuration files, or in a situation where multiple devices need to share
some basic VCA configuration parameters.
4.4.10.1 Saving VCA Settings
Select which VCA settings to save. By default, all VCA settings will be saved. The types of settings that can be
saved are:
 General: General VCA configuration parameters such as on/off state, VCA mode, etc.
 Zones: Zones and lines configuration.
 Rules: Rules that have been applied to zones and/or lines.
 Counters: Counters that have been configured against rules.
 Calibration: The calibration configuration.
 Classification: The classification configuration.
 Tamper: The tamper detection configuration.
 BIA: Burnt-in-annotation settings.
Click the Save button to save the settings.
4.4.10.2 Loading VCA Settings
Click the browse button to select the file to load. Select the types of VCA settings to load. By default all VCA
settings will be loaded and applied to the unit. Click the Load button to load the settings and apply them to the
unit.