User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 74 -
4.4.2.6.6Object Speed
Enable the object speed rule on the selected zone by checking the Speed Filter box in the properties inspector.
Adjust the lower and upper speed limits to suit the detection scenario. Objects that travel within the bounds of
the configured speeds, through a zone or over a line trigger the rule and raise an alarm. Note that the camera
must be calibrated for this function to be available.
4.4.2.6.7 Object Class
Once the camera has been calibrated, it's possible to include or exclude specific object types in the detection
rules. Select and enable an Object Filter by checking the box. Select whether the rule should include or
exclude the object type. Select the object type to include or exclude. Apply the changes.
In this example, the rule has been configured to include detection of people only. As illustrated, the person
generates an alarm, but the vehicle is filtered out and does not trigger the alarm.