User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 68 -
4.4.2.2 Properties Inspector
The properties inspector allows the user to assign detection rules to detection zones and detection lines.
Available rules will depend on the features available and settings applied, and may include the following:
 Object presence
 Object entered
 Object exited
 Object appeared
 Object disappeared
 Object stopped
 Object dwell
 Object direction
 Object speed
 Object Tailgating
The Abandoned Object rule is also available depending on the features available and settings applied. To get
started straightaway on this rule, see the Abandoned Object topic.
4.4.2.3 Customizing the Tracking Display
The tracking display window can be customized to show various levels of tracking data. Simply right click on
the tracking display window and select the Display option:
4.4.2.3.1 Display Blobs
By default, the blobs are not displayed. It's possible to switch the blob display on in order to observe how the
algorithm performs in different scenarios. Blobs are displayed in turquoise, as illustrated in the figure.
4.4.2.3.2 Display Objects in Multiple Colors
Select this option to toggle between 2-color display mode (alarmed objects in red, non-alarmed objects in
yellow), or multi-color displayed mode. In multi-color display mode, objects are displayed in a color selected by
the system.
4.4.2.3.3 Display Non-Alarmed Objects
By default, all objects are displayed: alarmed objects in red; and non-alarmed objects in yellow. The display of
non-alarmed objects and their trails helps optimally configure the rules by allowing the user to see how the
detection zones and object trails intersect. Uncheck this item to switch the display of non-alarmed objects off.