User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 30 -
Chapter 3 IE Remote Access
3.1 Features
The system itself has the IE based software that it can allow you to remote control the system via WAN or
Internet. So far, the DVR only support the browser which is developing on the base of Windows IE.
To install software via the system based IE to make you remote access from internet conveniently. DVR
supports C/S, B/S construction, WAN and LAN, as well as IP and domain name accessing.
System request:
We recommend user to use Window XP, Window Vista OS, and IE6.0 or 7.0 version.
3.2 Login
Once the system is connected to LAN, you can login via IE.
Note: Make sure the network setting in DVR is correct, and the ports have been open in router server. When
the system is connected to LAN or WAN, you could remote access through LAN or WAN.
A. Input the IP address into the IE browser. (i.e.: http://192.168.2.212, and the web port is 9098.)
B. Set the ActiveX all in ENABLE before you login, the IE browser will remind you to install the ActiveX
software, then click to install.
C. After installation, refresh the IE browser, and there’s login window will be shown.
Note：If there’s password set in DVR, input the admin or user password. Only the administrator has authority to
change the system setting.
D. Select the network type and language.