User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 22 -
AUTO MAINTAIN: if set in ON, the system will maintain the system very DAY, WEEK, and MONTH.
SYSTEM UPDATE: it’s to update the system through USB driver.
DEFAULT SETTING: to set the system in default, and all the data and setting will be deleted.
RESTART: to restart the system.
PARAMETER IMPORT: to import the DVR system setting parameter through USB.
PARAMETER EXPORT: to export the DVR system setting parameter through USB.
STANDBY: to set the DVR in standby.
2.2.3.5.6 PTZ
Use PTZ settings menu can set the parameters for the connected PTZ cameras.
Notice: Users could learn the info of PTZ camera form the user manual, include the PROTOCOLE and Bit rate.
PTZ SETUP
PTZ SETUP:
1. Connection: Connect the PTZ through BNC and 485A（TX,+）, 485B(RX,-) ports and power socket, there’s
detail in PTZ camera instruction.
2. Protocol: choose PELCO-D or PELCO-P as a protocol which is the same with PTZ. In 8CH DVR, there’s
“NEXT PAGE” for 5
th
-8
th
channel.
3. Baud Rate: there are 1200, 2400, 4800 and 9600 options.
4. Data Bit: there are 5, 6, 7 and 8 options
5. Stop Bit: there are 1 and 2 options.
6. Verify: there are Odd, Even, Mark, Space and None options.
7. Address: 001～255 are available to input if you use virtual keyboard, please refer to your PTZ camera
specification to know more.
8. Click APPLY to reserve and turn to main menu.
9. Click EXIT to exit the entire window.
2.2.3.5.7 NETWORK
Set network and DNS in network setting menu.