User manual

85XX Series Network DVR User Manual……………………………………………………………………….V1.0
- 12 -
Switch: Set the channel in ON or OFF status, that is to set the channel is open or close status.
Resolution: For 9504 DVR, there’re D1, HD1, CIF options;
For 9508 DVR, in CH1 and CH2, there’re D1, HD1, CIF options; and other channel only with HD1, CIF options.
Bitrate: There’re three options to be selected, L, M, H.
L->Low, the bit rate is as: CIF: 384 Kbps; HD1: 512 Kbps; D1: 896 Kbps;
M->Middle, the bit rate is as: CIF: 512 Kbps; HD1: 768 Kbps; D1: 1024 Kbps;
H->High, the bit rate is as: CIF: 768 Kbps; HD1: 1024 Kbps; D1: 1280 Kbps;
Frame Rate: The frame rate of image could be set, but the total frame rate is 200fps/PAL, 240fps/NTSC for
4CH, 400fps/PAL, 480fps/NTSC for 8CH. And the maximum frame rate for each channel is 25fps/PAL,
30fps/NTSC.
Note: 1 D1=4CIF, 1 HD1=2CIF.
Audio: To set the audio ON or OFF.
Rec. Mode:
POWER UP: the system will begin to record when DVR is start.
TIMER RECORD: the system will record as schedule.
Rec. Size: the system will process the record every 15minutes, 30minutes, 45minutes, and 60minutes.
Mask Area: to set the camera mask area in live demo.
After set the parameter, click APPLY to reserve and exit.
2.2.3.2.2 SCHEDULE RECORD
If select the record mode in TIME RECORD, the system will record as schedule. The user could set the time
duration to record.