Technical data

Overview and Updates
Procedure 5
1. Power up the system and verify that all of the fans are moving and that the system
powers up correctly.
2. To make sure that the firmware is matched in the CPU and I/O, follow the firmware
release notes and boot the update utility. Then use the verify command to ensure that
both the CPU and I/O ROM firmware revision match. If they do not match then
update the firmware with Version 4.0 or later.
3. Complete the assembly of the system enclosure.
4. Verify the system is functional by running all extended power−up self−tests.
5. Install the new OSF/1 Version 2.1 or later or VMS Version 6.1 kit or later (if not
already done) and restore all of the customer's files.
6. Package the old system module for return to Digital. Use the packaging from the new
system module.
2-11