Instruction manual

Installation
Installation
Choosing a
TURBOchannel
Slot
The TURBOchannel modules plug directly into either the system
module (3 slots) or the I/O module (3 slots). See Figure 6–1.
If you are installing options, you should consider the widths of
the modules you plan to use, as well as where future options
would be placed.
Installation
Procedure
To install a TURBOchannel module, follow these steps:
1. Wear an antistatic wrist strap whenever you handle a
module or work inside the system box. See Using An
Antistatic Wrist Strap in Chapter 2.
2. Choose one or more unused TURBOchannel slots, as needed,
considering the locations and sizes of existing modules. You
may find that one or more existing modules need to be moved
to make space for a new module software configuration when
changing module slots.
TURBOchannel Options 6–5