Instruction manual

Installing Memory Modules
Step 4: Install
Modules in
MMB
Install the memory modules in the MMBs, using the previous
guidelines. Hold the module at an angle, with the notch end
as shown in Figure 5–7, and place it in the slot. Make sure that
the board is firmly seated in the connector, but do not force it.
Push the board upright so that it stands vertically. You should
hear a distinctive click on each side when the module is secured
by the metal clips.
Figure 5–7 Installing a Memory Module
MLO-007566
1
Working from the lower numbered slots to the higher numbered
slots, continue adding modules in empty slots of the MMBs until
the system contains the desired amount of memory.
5–10 Memory Modules