Instruction manual

2–10 Removing the Front Panel ........................... 2–15
2–11 Using the Antistatic Wrist Strap . . . ................... 2–16
3–1 Disconnecting Power and SCSI Cables.................. 3–3
3–2 Removing the Drive Bracket ......................... 3–4
3–3 Bracket Power Cable Connectors . . . ................... 3–5
3–4 Bracket SCSI Cable Connectors ....................... 3–6
3–5 Connecting Cables to a Removable-Media Drive .......... 3–7
3–6 Placing the Drive into the Bracket . . ................... 3–8
3–7 Diskette Drive Brackets and Cables. ................... 3–9
3–8 Positioning the Cables in the Slot . . ................... 3–10
3–9 Sliding the Bracket into the System ................... 3–11
3–10 Bracket Power Cable Opening ........................ 3–12
3–11 Connecting Cables to the System . . . ................... 3–13
3–12 Removing the Blank Bezel from the Front Panel .......... 3–14
4–1 Fixed Disk Drive Positions ........................... 4–2
4–2 Connecting Fixed Disk Drive SCSI and Power Cables ...... 4–3
4–3 Installing a Fixed Disk Drive ......................... 4–4
4–4 Removing a Fixed Disk Drive ........................ 4–5
5–1 Memory Modules .................................. 5–2
5–2 Memory Mother Board (MMB) ........................ 5–4
5–3 Location of MMBs and Memory Modules ................ 5–5
5–4 Removing MMB Clips . . . ........................... 5–6
5–5 Removing an MMB ................................ 5–7
5–6 Placing the MMBs ................................. 5–8
5–7 Installing a Memory Module ......................... 5–10
5–8 Installing an MMB................................. 5–11
5–9 Installing MMB Clips............................... 5–12
5–10 Removing MMB Clips . . . ........................... 5–14
5–11 Removing an MMB ................................ 5–15
5–12 Removing a Memory Module ......................... 5–16
5–13 Installing an MMB................................. 5–17
5–14 Installing MMB Clips............................... 5–18
6–1 TURBOchannel Option Slots ......................... 6–3
6–2 TURBOchannel Option Widths ....................... 6–4
6–3 Removing a Metal Filler Plate ........................ 6–6
6–4 Seating a TURBOchannel Module . . ................... 6–7
6–5 Securing a TURBOchannel Module . ................... 6–8
v