Instruction manual

Installing a Removable-Media Drive
Step 11:
Remove Blank
Bezel
Remove the blank bezel from the front panel, as shown in
Figure 3–12. Push the bezel out from the sides. Pushing from
the middle may break the bezel. This bezel is on the left as you
face the front of the panel. When installing two drives, remove
both blank bezels.
Figure 3–12 Removing the Blank Bezel from the Front Panel
MLO-007584
Save the blank bezel in case you ever remove the drive and need
to replace the bezel.
Completion
This completes the installation of a removable-media drive.
3–14 Installing a Removable-Media Drive