Instruction manual

Installing a Removable-Media Drive
Step 4:
Connect Cables
to Drive
Connect the SCSI and power cables to the ports on the rear
of the drive, as shown in Figure 3–5. The connectors are keyed;
make sure that they are oriented correctly before attempting to
insert them into the drive ports.
Figure 3–5 Connecting Cables to a Removable-Media Drive
AUDIO OUT
GND RL012
ID SELECT
MODE
F.GND
GND
DC INPUT
12V+10%5V+5%
MLO-007515
2
1
Installing a Removable-Media Drive 3–7