Instruction manual

Upgrade Procedure
3. Enter the SHOW CONFIG command.
A screen similar to the following appears:
>>> show config
KN4n-A Vn.n
08-00-2B-OA-7D-CB
32 MB
DEVNBR DEVNAM INFO
--------------------------------------
1 NVR OK
2 LCSPX OK
.
.
10 SCSI 0-RZ24 3-RZ25
This information shows an RZ24 drive set to SCSI ID 0 and an
RZ25 drive set to SCSI ID 3.
Write down your system drives and SCSI ID settings here. You
will need them for future use.
2–2 Upgrading a VAXstation 4000 Model 90/90A