Service manual

8508A
Service Manual
4-18
9006 - Serial Loop Mismatch xxxxxxxx id
xxxxxxxx is the actual data received in binary format.
See Table 4-7 for descriptions of the serial loop mismatch errors.
Table 4-7. Serial Loop Mismatch Errors
id Fault
00 U901_C pattern mismatch – should be 00000001 (00000000 if rear fitted)
01 U901_B pattern mismatch – should be 00010000
02 U901_A pattern mismatch – should be 10100100
03 U902_C pattern mismatch – should be 00000000
04 U902_B pattern mismatch – should be 00000000
05 U902_A pattern mismatch – should be 00000000
06 U903_C pattern mismatch – should be 00010101
07 U903_B pattern mismatch – should be 01111111
08 U903_A pattern mismatch – should be 11111011
9007 Unknown Engine Instruction Addr id
id indicates the code that the engine was attempting to interpret as an instruction.
Execution Errors
An Execution Error is generated if a received command cannot be executed because it is
incompatible with the current device state, or because it attempts to command parameters
which are out-of-limits.
In remote operation, the EXE bit (4) is set true in the Standard-defined Event Status Byte,
and the error code number is appended to the Execution Error queue.
The error is associated with status reporting, and the queue entries can be read
destructively as LIFO by the Common query command EXQ?. There is no queue when
execution errors occur during manual operation; instead, the description of the error is
sent directly on the Menu display.
See Table 4-8 for descriptions of the execution errors.
riešenia na presné meranie
http://www.elso.sk