User manual

Chapter 5 NICE 3200/3220 Reference and Installation

NICE 3200, NICE 3220, ICES 101, ICES 120, ICEB 3200 User Manual

5.12 Removing the ICES 101/120 ETX Module and Heatsink

1. To remove the heatsink and ETX module, remove the 4 screws at

the corner of the ETX module. Please note these same 4 screws also

secure the heatsink.

2. With the ETX module mounting screws removed, simply pull up

on the module on four corners to pop the module out of the four ETX

sockets that connect to the carrier board.