User manual

Copyright © 2006 NEXCOM International Co., LTD. All rights reserved
44
Chapter 4 ICEB 3200 Carrier Board Reference
NICE 3200, NICE 3220, ICES 101, ICES 120, ICEB 3200 User Manual
Graphics
From ETX Module:
Internal LVDS Interface
Hirose DF13-20DP x 2 for Dual Pixels LVDS
External Display Interface by Analog CRT DB15 VGA Con
nector
Ethernet
From ETX Module:
10/100 Fast Ethernet, RJ45 with LED connector x 1
Carrier Board with On Fast Ethernet LAN Chip VIA VT6105
via PCI Interface. RJ45 with LED Connector x 1
Expansion
PC/104-Plus ( ISA+PCI) x 1
PCMCIA Socket x 1
Supports CardBus 32-bit and 16-bit cards
Power Supply
On-board DC to DC circuit support Power Input Range from
+9V to +36VDC.
Standard Conguration for NICE 3200 series models is
+24VDC Input
4.4 ICEB 3200 Specifications
IDE
Internal CompactFlash socket x 1 ( Primary IDE )
External Access Compact Flash Socket x 1 ( Secondary IDE )
44-pin IDE Connector x 1 (Primary IDE )
COM Ports
COM 1 ~ 2 from ETX Module support RS232
COM 3 ~ 4 via ISA Interface, support RS422/485
Automatic RS-485 data ow control
Optical Isolation, Max 2KV
±15KV ESD protected
10-pin Screw Terminal Connector ( Pin assignment: TBD )
Speed: RS-422/485: 50 ~ 921.6 Kbps
USB 2.0
USB 2.0 Ports x 2 in the Front
USB 2.0 Ports x 2 in the Rear
PIO
LPT Port x 1 ; 25-pin D-type supporting bi-directional, EPP
and ECP modes
Audio
From ETX Module:
Audio Out
Mic In
NOTE: External access compact ash socket is only available
for ICES101. With the ICES 120, there is no 2nd CF socket sup-
port.
WARNING: If you use 9V~12V voltage, please change the JP4
to 1-2, and not +12V and -12V power output. Default JP4 is 3-4
while you use 13V~36V voltage.