Technical data

Troubleshooting
4-21
DIGITAL Server 3220/3220R
Problem Possible Cause Action
Server does not boot
from an internal drive.
SCSI device drivers not
installed or incorrectly
installed on the drive.
Properly install all required
SCSI device drivers.
Operating system software
is not installed on the drive.
Install the appropriate operating
system.
Requested partition does
not exist.
Partition the drive and then
reload the operating software.
Boot drive at wrong SCSI
address.
Set boot drive to lowest
“primary” SCSI address.
Drive not formatted. Format the drive.
CAUTION: Formatting the
drive will destroy all data on the
drive.
Drive has failed. Replace the drive.
Drive cannot read or
write information.
Loose or incorrectly
installed cables.
Make sure all cables are
correctly installed.
Drive is not correctly
formatted or partitioned.
Format and partition as
required using the supplied
operating system.
Drive failure. Check drive status LEDs for
a drive failure indication.
Replace the drive.