Technical data

Server Software and Utilities
2-2
ServerWORKS Quick Launch
ServerWORKS Quick Launch is used to install the server’s Network Operating
System (NOS). In addition to providing quick and seamless NOS installation, Quick
Launch also provides device drivers, documentation, and the ability to make diskettes
of utilities such as diagnostics. For more information, refer to the
Quick Launch
Getting Started
guide.
BIOS Setup Utility
The BIOS Setup utility enables you to select and store information about the server’s
hardware and software in the battery-backed memory of the CMOS RAM. This
information takes effect each time the server boots and can be changed any time you
run setup.
You should use the BIOS Setup utility each time you need to reconfigure or expand
the server.
The following is an example of a BIOS Setup utility screen.
CAUTION:
The server was setup for normal operation at
the factory and will operate properly without additional
configuring.
It is important for you to read carefully and understand this
section before attempting to modify the server’s factory
settings. Changing some settings might cause the server to
operate improperly.