Technical data

Upgrade Procedure
7-5
DIGITAL Server 3220/3220R
11. At this time, the customer should call their software service provider to update their
license with the new system serial number. If desired, the customer can continue to
use the old system; in which case, the customer will need to buy a new software license
for the new system
Troubleshooting Guidelines
If the server does not boot properly after installing upgrade, check the following items:
•
Check all the configuration information that the customer recorded from the
previous system.
•
Verify that all cables are seated properly.
•
Verify that all cards, boards, and modules are seated properly.
•
Check the processor speed settings.
•
Use the Troubleshooting information in Chapter 4 to identify the problem.
•
Create and run diagnostic diskettes by using the Quick Launch CD-ROM. AMI
Diagnostic software contains an advanced set of diagnostic utilities for identifying
and correcting problems when upgrading the server.