Technical data

FRU Replacement
5-79
DIGITAL Server 3220/3220R
6. Lift the retaining clip slightly and push on the battery from the side to slide it
out.
7. Install the new battery/RTC. When installing the new battery, make sure the
“+” side faces up.
8. For the DIGITAL Server 3220 only, replace the side panel and then close
and lock the front bezel.
9. For the DIGITAL Server 3220R only:
a. Replace the top cover.
b. Slide the server into the rack and then secure it using the two
previously removed screws.
c. Connect the cable management arm.
d. Replace the front bezel.
e. Connect any previously removed cables to the rear of the server.
10. Restore power, reboot and then run the BIOS Setup utility to configure the
server.