Technical data

FRU Replacement
5-72
Removing and Replacing the Storage Backplane
1. Turn off the server.
2. Remove the front bezel.
3. Remove the two screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Record all cable configuration information.
7. Disconnect all cables.
8. Remove all hot swap drives connected to the storage backplane.
9. Remove the six screws securing the storage backplane to the chassis.
10. Remove the storage backplane from the chassis.
11. Replace the storage backplane by performing the removal steps in reverse
order.