Technical data

FRU Replacement
5-49
DIGITAL Server 3220/3220R
Removing and Replacing the Primary Cooling Fan
1. Turn off the server.
2. Remove ac power.
3. Unlock and open the front bezel, loosen the thumbscrews, and then remove
the side panel.
4. Remove the processor module retaining bracket and the processor module.
5. Disconnect the fan and speaker cables from the main logic board.
6. Press the retaining tab and slide the housing toward you to release the
mounting tabs.
7. Remove the housing from the chassis.
8. Press out on the retaining tabs and remove the fan from the housing.
9. Replace the fan by performing the removal steps in reverse order.