Technical data

FRU Replacement
5-47
DIGITAL Server 3220/3220R
Removing and Replacing the Drive Bay Cooling Fan
The following procedure can be used to remove the drive bay cooling fan.
1. Turn off the server.
2. Remove ac power.
3. Unlock and open the front bezel, loosen the thumbscrews, and remove the
side panel.
4. Loosen the captive screws and gently extend the storage backplane
assembly to its maintenance position.
5. Disconnect the fan cable from the main logic board.
6. Press the plastic tabs to release the fan from the fan housing.
7. Remove the fan from the fan housing.
8. Replace the fan by performing the removal steps in reverse order.