Manualshelf

Technical data

ManualsBrandsDigital ManualsComputer equipment3220R Series
131132133134135136137138139140
FRU Replacement
5-45
DIGITAL Server 3220/3220R
Removing and Replacing the CD-ROM Drive
1. Turn off the server.
2. Remove ac power.
3. Unlock and open the front bezel, loosen the thumbscrews, and then remove
the side panel.
4. Disconnect the power, data, and (if installed) audio cables from the CD-ROM
drive.
5. Remove the screw from the drive bay.
6. Slide the drive out from front of the drive bay by applying pressure at the rear
of the CD-ROM drive.
7. Remove both the side rails from the removed CD-ROM drive and install
them on the new CD-ROM drive.
8. Set jumpers on the new CD-ROM drive identical to those on the removed
CD-ROM drive.
9. Replace the CD-ROM drive by performing the removal steps in reverse
order.