Technical data

FRU Replacement
5-43
DIGITAL Server 3220/3220R
Removing and Replacing the Diskette Drive
1. Turn off the server.
2. Remove ac power.
3. Unlock and open the front bezel, loosen the thumbscrews, and then remove
the side panel.
4. Disconnect the power and data cables from the drive.
5. Loosen the drive bracket retaining screw.
6. Slide the drive toward the rear, to disengage the bracket tabs, then away
from the drive bay.
7. Remove the screws securing the bracket to the bottom of the drive and slide
the drive from the bracket.
8. Replace the diskette drive by performing the removal steps in reverse order.