Use & care guide

www.procontechnology.com.au Phone: [phone] FAX: [phone]
NGL
IS
H
• After batteries are charged, test them individually in the battery tester slo t
before use. Only batteries that show the same voltage strength should be
used together. For alkaline batteries, use those that show 3 to 4 Green
lights together and for rechargeable batteries, use those that show 3
Green lights together. Mixing weak or partially charged with fully charged
batteries will result in your device not functioning properly or no t
powering up at all. Also remember not to mix different battery t ypes
together (eg: Different brands or alkaline with rechargeable) .
• For best results, charged alkaline cells should be promptly removed within
a few hours after charging is completed. Continuous connection to the
metal plates (whether the charger is ON or OFF) for a prolonged
period will shorten battery life. Recharged alkaline cells should be used
as soon as possible as they are not suitable for long term storage due t o
their rapid self discharge .
• Different brands of alkaline cells may give different results, depending on
the chemical composition used in making the product. Do not be
surprised to find that some top brand alkaline cells may yield lower cycle
life than less well-known brands. Try different brands of batteries and
decide for yourself which brands work best in your applications and in
the REZAP charger.
• The charger has four main slots with four corresponding green ligh t s .
Only put one battery per slot. Do not try to put one battery on top o f
another in a single slo t.
• Please do not connect the 6V cable clips to any other types of ba tt eries
except 6V dolphin/lantern batteries as recommended .
• The 9V and 6V batteries occupy the first and forth slots respec t ively .
When a 9V or a 6V battery is being charged, do not place another ba tt ery
in the first (far left) or the forth (far right) slot as they may conflict with one
another.
• When charging 9V or 6V batteries, leave batteries in the charger
for an additional 2 to 3 hours after the green light appears, to absorb
addi t ional trickle charge power.