Use & care guide

www.procontechnology.com.au Phone: (03) 98306288 FAX: (03) 98306481
ENG
REZAP® RBC-883 SPECIFICATIONS
Microcontroller
Digital Works' state-of-the-art proprietary Multi-Chemistry
battery
charger’s high performance 8-bit microprocessor, CMOS, fully
static,
employing advanced RISC architecture with integrated
analogue-to-
digital converters and multi-channel high speed input/output
ports
controlling the whole charging process in real
time.
Input
Voltages
220V - 240V 50Hz for SAA, GS & BS Standards 110V - 120V 60Hz
for
UL, CUL & JIS
Standards
Output
Rating
16.5V max, 4 x 250mA max, 10 Watts
max.
Supported
Battery
Sizes
1 to 4 x AAAA, AAA, AA, N, C, D & prismatic sizes (1.2 or
1.5V)
1 x 9V and 1 x 6V dolphin/lantern
batteries
Supported
Battery
types
Alkaline, Titanium, RAM (Rechargeable Alkaline Manganese),
NiCd
and or NiMH batteries. (Do not attempt to charge battery types
not
specified.)
Supported
Battery
Capacities
(NiCd/NiMH)
AA size Up to
2500mAh
C & D size Up to
4000mAh
(Do not attempt to charge higher than the above limits as
overload
may occur, causing damage to the
charger)
Charging
Time
1 to 17 hours (time variation depends on type, make, size
and
condition of
battery)
Charging
Currents
Selection
Fully
Automatic
Battery
Tester
Function
Built-in simulation of voltmeter, which measures the strength of
each
battery and displays the voltage level via the 4 x green
LEDs.
Protection
Schemes
employed
Alkaline battery charge-safe
protection,
Faulty battery detection &
rejection,
Overcharge
protection,
Short circuit
protection,
Wrong polarity
protection,
Negative Delta Voltage
protection,
Zero Delta Voltage
protection,
Temperature
protection,
Time-out
protection.
Safety
Compliance
AS/NZS 3108:1994; AS/NZS 3350.1:2000; AS/NZS
3350.2.29:2001
EN 206041A; EN 60335.1; EN 60335.2.29 & CE
(EN50082-1)
EMC; C-Tick (AS/NZS 1044:1995) & FCC Part 15 Class
B
UL 1310 Fourth Edition Class 2 Power
Units
CSA Standard C22.2 No.
CAN/CSA-223-M91
CSA Informs Power Supplies No.
3
W
ei
g
h
t
850g approx. (1Kg net)
Notes:
All trademarks referenced in this User Guide belong to their respective
owners.
Specifications subject to change without notice for further
product
improvements.