User guide

Installation
This section describes the installation of the DMP128, including:
• Mounting the DMP128
• DMP128 Models
• Hardware Configuration
• Rear Panel Features and Cabling
• USB Configuration Port (Front Panel)
• Front Panel Indicators
• Reset Actuator and LED
Mounting the DMP128
The 1U high, full rack width, 8.5-inch deep DMP128 Digital Matrix Processor can be:
• Set on a table,
• Mounted on a rack shelf,
• Mounted under a desk or tabletop.
For detailed mounting options and UL rack mounting guidelines, (see
MountingtheDMP128 on page165).
DMP128 Models
There are six models of the DMP128 available. Each model has a different feature set for
various applications.
DMP128 Model Matrix
The following feature matrix provides a breakdown of the various DMP128 model
variations. Where differences occur in operation, they are noted in the text.
Model Description
DMP128 12x8 ProDSP Processor
DMP128 C 12x8 ProDSP Processor with AEC
DMP128 AT 12x8 ProDSP Processor with Dante Interface
DMP128 C AT 12x8 ProDSP Processor with AEC, EXP Bus, and Dante Interface
DMP128 C P 12x8 ProDSP Processor with EXP Bus, AEC, and Telephone modem
DMP128 C PAT 12x8 ProDSP Processor with AEC, Telephone modem, EXP Bus, and
Dante Interface
Hardware Configuration
The DMP128 does not have physical controls for configuration or operation.
The DMP128 has several front and rear panel operational indicators and a rear panel
reset button for hardware resets outlined in the following pages.
DMP128 • Installation and Operation 5