DIGITAL T WIRELES S T E R E O TM USER GUIDE
Wi AudioStream EL2 CONGRATULATIONS Thank You For Choosing the Wi AudioStream EL2 Pocket Portable Stereo Digital Wireless System. Congratulations on your purchase of the Wi AudioStream EL2 Pocket Portable Stereo Digital Wireless Microphone, Lavalier & Audio Monitoring System. Please thoroughly read this User’s Manual for all the feature operation information necessary to install and operate your new Wi AudioStream EL2 system.
Wi AudioStream EL2 PACKING LIST Wi Transmitter Wi Receiver Wi Sure-Fit™ Earset with Wi Simple-Twist Omnidirectional Detachable Microphone Capsule Universal USB Transmitter/Receiver AC Charger Mounting Brackets Clip Wi Simple-Twist™ Detachable Earset Cable Wi Sure-Fit™ Lavalier with Wi Simple-Twist Unidirectional Detachable Microphone Capsule 1/4”-20 Camera Earset/Lavalier Rubber Flat Surface MIC Cable Clip Hot Shoe & Clip MIC Clip Windscreenss 1/8” to 1/8” TRS Stereo 1/4” Stereo Male to 1/8” 1/8” D
Wi AudioStream EL2 TRANSMITTER FEATURES Transmitter Controls and Connections 4 Audio IN Jack: Provides mono and stereo connection for your microphone or other sound source. Power ON/OFF: Press and hold the Power button for 2 seconds to turn the transmitter ON or OFF. Power/Status LED: Displays the status of six functions: ON/OFF, Battery Charging, Low Battery, Pairing, Mute, Operating and Sleep Modes.
Wi AudioStream EL2 TRANSMITTER FEATURES Mute: Link/Pair: Press and hold for 1.5 seconds to mute or unmute the audio. The Link button performs two functions: Pairing and Linking. Pairing allows the Transmitter to connect to up to eight (8) different receivers sequentially to create a wireless audio matrix. Press and hold for 3 seconds until the green LED display fast flashes, indicating that it is ready to pair with a Receiver.
Wi AudioStream EL2 TRANSMITTER FEATURES Sleep: Press and hold for 2 seconds to put the Transmitter and Receiver into power save mode (all settings will be preserved). Press once to wake-up the Transmitter and Receiver. (Sleep function will prolong the Transmitter battery life by 50% and the Receiver battery life by 35%). Mode: Press and hold for 2 seconds to select the desired operation indicated by the following blue LED flashing sequence.
Wi AudioStream EL2 TRANSMITTER FEATURES Charging Port: This is a mini USB connection to power up and charge the internal batteries. The Transmitter can be charged using the supplied universal AC charger, via an instrument or computer USB port, or the optional AA battery power booster adapter. 11 Belt Clip: The Transmitter can be attached to belts, shirts and pants’ pockets. The compact and lightweight design is easy to wear without impeding body movement.
Wi AudioStream EL2 RECEIVER FEATURES Stereo connection for professional Sound Systems, Monitors, Mixers, In-Ear Monitors, Headphones and more... Receiver Controls and Connections Audio OUT Jack: Power ON/OFF: 8 Press and hold for 2 seconds to turn the receiver ON or OFF Power/Status LED: Displays the status of six functions: ON/OFF, Battery Charging, Low Battery, Pairing, Mute and Sleep mode. Volume UP: Press once to increase the volume level one step at a time.
Wi AudioStream EL2 RECEIVER FEATURES Link/VoIP: This multifunction button performs the Pairing and VoIP MIC activation. Pairing allows the Receiver to be discovered by the Transmitter. Press and hold the Link button for 3 seconds until the green LED display fast flashes, indicating that it is ready to pair with a Transmitter. Once the Transmitter pairs with the Receiver, the LED on both devices will turn solid green.
Wi AudioStream EL2 RECEIVER FEATURES Mute/Pause/Play: Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio. Press once to pause or play an audio track (when Receiver is used with the optional Wi USB Transmitter, this function will remotely control the media player or sequencing software to mute, pause or play the audio track). VoIP Microphone: Press the LINK / VoIP button (see page 9) once to activate the VoIP Microphone.
Wi AudioStream EL2 RECEIVER FEATURES 11 Charging Port: This is a mini USB connection to power up and charge the internal batteries. The Receiver can be charged using the supplied universal AC charger, via an instrument or computer USB port, or the optional AA battery power booster adapter. 12 Belt Clip: The Receiver can be attached to belts, shirts and pants’ pockets. The compact and lightweight design is easy to wear without impeding body movement.
Wi AudioStream EL2 EARSET & LAVALIER FEATURES Removable MIC1: Wi Simple-Twist™ omnidirectional removable microphone capsule model JM-ST35O for ear-worn, lavalier and instrument miking applications. Removable MIC2: Wi Simple-Twist™ unidirectional removable microphone capsule model JM-ST35U for ear-worn, lavalier and instrument miking applications.
Wi AudioStream EL2 EARSET & LAVALIER FEATURES 13
Wi AudioStream EL2 EARSET HANDLING Handling The Wi Sure-Fit EL Series The Wi Sure-Fit™ EL Series is a high-precision instrument and is designed for durability and flexibility. The following are some of the basic precautions to prevent damage to the Wi Sure-Fit™ EL. not bend the boom over sharp edges such as Do the end of your fingernail or twist the boom around a tight radius less than 1/2” diameter.
Wi AudioStream EL2 EARSET HANDLING not bend and wrap the cables in any way that Do creates severe coiling or strain on the cables.
Wi AudioStream EL2 GETTING STARTED Ready, Charge, Go! AC Charger USB Connector Before using your new Wi AudioStream™ EL2 digital wireless system, you need to fully charge the batteries for approximately 2 hours. Charging 1. Plug the AC Charger into a power socket. 2. Connect the USB power cable to the USB port on the AC charger. 3. Connect one of the two mini USB connectors to the transmitter USB port. 4. Connect the second mini USB connector to the receiver USB port. 5.
Wi AudioStream EL2 GETTING STARTED More Charging Options The Wi AudioStream™ EL2 power source’s flexible design boasts an internal rechargeable battery for 4~6 hours of battery operation. The optional ON-THE-GO AA battery power adapter provides for 10~13 hours of extended battery operations and the AC power adapter provides continuous operation, so there’s no need to power down the Wi AudioStream EL2 for recharging or swapping the AA batteries on the optional ON-THE-GO battery power booster.
Wi AudioStream EL2 EARSET SETUP The Wi Sure-Fit Earset & Lavalier Delivering unmatched value, comfort, sound quality and secure fit, the Wi Sure-Fit™ EL2 Series earset and lavalier microphone delivers three (3) applications in one versatile microphone including ear-worn, lavalier and video camera/ instruments miking applications.
Wi AudioStream EL2 EARSET SETUP Connecting The Earset Cable The Wi Sure-Fit™ EL2 Series ultra-low-profile detachable cable delivers minimum visibility with maximum durability. Optional adapters give the Wi Sure-Fit™ EL2 series earset great flexibility for use with different pocket wireless systems including AKG™, Shure™, Sony™, Audio-Technica™ and Sennheiser™. 1. Locate the detachable earset cable and the included detachable adapter for the Wi AudioStream™ EL2 pocket portable digital wireless system. 2.
Wi AudioStream EL2 EARSET CUSTOM FITTING Left or Right Ear Placement 2. Rotate the boom 180 degrees to the preferred ear wearing preference. 3. Release the locking switch when rotation is complete. No need to rework the bend or reshape the boom again when switching from left to right ear placement. The boom maintains its original angle to capture vocals from the near-the-mouth position, from the opposite side. 20 1. Press the boom locking switch located on the bottom of the Silicon ear mount.
Wi AudioStream EL2 EARSET CUSTOM FITTING Wearing the Wi Sure-Fit Earset The Wi Sure-Fit™ EL Series advanced ergonomic Silicon ear-mount design delivers an unmatched comfortable fit in seconds while ensuring secure boom placement even when the head moves, or when used with glasses or other head-worn accessories. This ultra-lightweight MIC is incredibly easy to wear even for an extended time. 1. Pull the “C” shaped Sure-Fit™ silicon ear mount wide open and clip over the ear 2.
Wi AudioStream EL2 EARSET CUSTOM FITTING Adjusting the Boom Length The Wi Sure-Fit™ EL Series boom can easily be adjusted to the appropriate length and placement with a simple push of a button to capture the closest near-the-mouth vocals clearly and consistently. The boom locking mechanism keeps the boom securely in place to provide good gain and natural sound that doesn’t change when the head moves. 2.
Wi AudioStream EL2 EARSET CUSTOM FITTING Adjusting the Boom Curve The Wi Sure-Fit™ EL Series bendable boom can easily be adjusted to position the microphone tip as close as possible to the mouth for best vocal gain and clarity. Adjust the curvature of the boom only when necessary. If the microphone tip is away from the cheek, this will result in lower gain and more ambient noise. 1.
Wi AudioStream EL2 Positioning The Microphone Capsule The Wi Sure-Fit™ EL Series removable microphone capsule is located at the tip of the boom. The key to maximizing the sound quality is to locate the capsule as close as possible to the mouth without touching the face. EARSET CUSTOM FITTING 1. Press the boom locking switch located on the bottom of the Silicon ear mount. 2. Slide the boom shaft to position the MIC capsule just behind the corner of your mouth when you are smiling.
Wi AudioStream EL2 EARSET CUSTOM FITTING Using The Earset/Lavalier Cable Clip The Wi Sure-Fit™ EL Series comes with an Earset/ Lavalier cable clip to prevent movement of the cable from dislodging the earset. The clip is specifically designed to match the diameter of your cable, either 1.4mm or 2mm. 1. Locate the cable clip and gently pull the cable down into the rubber cable channel opening on the clip. 2.
Wi AudioStream EL2 LAVALIER CUSTOM FITTING Using The Lavalier Option The Wi Sure-Fit EL Series comes standard with a detachable lavalier cable for use with the removable MIC capsule.
Wi AudioStream EL2 REPLACING MIC CAPSULES 3 Fasten the MIC capsule from the earset or lavalier MIC port by screwing in the MIC capsule clockwise until SNUG! Be certain not to overtighten. 2. Align the MIC capsule threads in a straight line with earset or lavalier cable MIC port 1. Remove the MIC capsule from the earset or lavalier MIC port by unscrewing the MIC capsule counterclockwise.
Wi AudioStream EL2 PAIRING (Tx) Pairing the Wi AudioStream EL2 Before using the Wi AudioStream EL2, you will need to pair the Transmitter with the Receiver. Pairing will allow a connection between the Transmitter and the Receiver. 1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and holding the POWER button , on each of the units for 2 seconds. 2. Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
Wi AudioStream EL2 CONNECTING THE MIC Single and Dual MIC connection • For single MIC connection, ensure that the Transmitter is in Mono Mic-in Mode and the LED is in fast blue flashing mode. • For dual MIC connection, ensure that the Transmitter is in Stereo Mic-in Mode and the LED is in slow blue flashing mode Transmitter Connection Receiver Connection Always route the audio cable beneath the Tx & Rx units’ belt clip to prevent accidental disconnection.
Wi AudioStream EL2 CAMERA CONNECTION Using The 1/4”-20 Hot Shoe & Clip The Wi AudioStream EL2 transmitter and receiver are designed to mount video camera DSLR and handheld recorders This powerful solution lets you wirelessly capture superb vocals and amazing ambient sounds easily and accurately. 1. Locate the 1/4” -20 Hot Shoe flash adapter and the U-Type Speed Nut 1/4” -20 screw attachment for tripods and bipods. 2.
Wi AudioStream EL2 CAMERA CONNECTION Using The Plastic Clip Attachment The Wi AudioStream EL2 transmitter and receiver can also mount to video camera, DSLR and handheld recorders using the quick latch plastic mounting brackets. 1. Locate the Plastic-Clip attachment for the Wi Transmitter and Receiver. 2. Insert the Plastic-Clip to the Wi Transmitter and Receiver belt clip. 3. Remove the protective strip from the adhesive backed Plastic-Clip. 4.
Wi AudioStream EL2 CAMERA CONNECTION Connecting the Receiver to The Camera 1. Turn the camera off before installing the Wi AudioStream receiver to the camera. 2. Loosen the bottom lock ring on the 1/4” -20 Hot Shoe flash adapter camera accessory. 3. Insert/slide the mounting foot of 1/4” -20 Hot Shoe flash adapter into the camera accessory shoe and tighten the bottom lock ring. 4. Rotate the Wi AudioStream receiver to preferred direction and tighten the upper lock ring.
Wi AudioStream EL2 CAMERA CONNECTION Audio Cable Connection 1/8” to XLR Mono Cable 1. Locate the 1/8” to 1/8” TRS stereo audio cable or the 1/8” to XLR TRS audio cable. 2. Insert the 1/8” TRS stereo end of the audio cable into the Wi AudioStream EL receiver audio output jack. 3. Insert the 1/8” TRS stereo end of the audio cable into the Camera MIC-IN or Line-In audio input jack. 4. Use the 1/8” TRS to XLR audio cable id your camera is equipped with XLR audio input ports.
Wi AudioStream EL2 IN-EAR MONITORING SETUP PLEASE READ THIS FIRST Set the Transmitter to the Line-in Stereo Mode (Blue LED double flashing) for operation with earphones. Refer to the back of the transmitter for a reference listing of the operating modes. Transmitter Connection Audio Monitoring Receiver Connection Always route the audio cable beneath the Tx & Rx units’ belt clip to prevent accidental disconnection.
Wi AudioStream EL2 VoIP MICROPHONE SETUP PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). Wi USB Transmitter Connection Connect the optional plug-and-play Wi USB Transmitter to your laptop or desktop USB port upon restart. Your system is now ready to use. No software or drivers required for this installation.
Wi AudioStream EL2 Tx BUTTON FUNCTIONS Transmitter (Tx) Button Functions Function Button POWER Pairing Mode LINK Signal Re-routing LINK Volume UP/Down Mute ON/OFF Sleep / Wake up Stereo Mic-in Mode Power ON/OFF Mono Mic-in Mode (Factory Setting) Stereo Line-in Mode 36 Activation Press and Hold Hold Time LED Status 2 sec Solid Green Fast Green Flashes Press and Hold 3 sec Click Click Click for Step, Press and hold for Auto Click Press and Hold 1.
Wi AudioStream EL2 Tx LED INDICATOR CHART Transmitter (Tx) LED Indicator Chart Function Searching For Receiver Linked to Receiver Sleep Mode Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green Two Green Flashes Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF 37
Wi AudioStream EL2 Rx BUTTON FUNCTIONS Receiver (Rx) Button Functions Function Button Power ON/OFF Pairing Mode Voice Over IP MIC Volume UP/Down Mute ON/OFF Play/Pause Next Track Prev Track 38 POWER LINK LINK/VoIP Activation Hold Time LED Status Press and Hold 2 sec Solid Green Press and Hold 3 sec Fast Green Flashes Click (With Optional USB Tx Dongle) Click Solid Green LED and Two Blue LED Flashes Click for Step, Press and Hold for Auto Click Press and Hold 1.
Wi AudioStream EL2 Rx LED INDICATOR CHART Receiver (Rx) LED Indicator Chart Function Searching For Transmitter Linked to Transmitter Sleep Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status Flashing Green Solid Green Two Green Flashes (Activated by Tx) Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF 39
Wi AudioStream EL2 PRODUCT SPECIFICATIONS Wi AudioStream EL2 Technical Specifications Specifications Transmission Format: Frequency Response: Frequency Selection: S/N Ratio: Distortion: Connectors: Max Input Level: Max Output Level: Input Impedance: Output Impedance: Rechargeable Battery Life: Power Input: 40 2.4 GHz, 16-bit, 48kHz Digital Wireless 15Hz to 20kHz Auto select More than 89 dB (A-weighted) for stereo line-in mode More than 84 dB (A-weighted) for stereo and mono MIC mode 0.12 % THD 1/8” (3.
Wi AudioStream EL2 PRODUCT SPECIFICATIONS Specifications Battery Power Booster: 10~13 hours (With optional AA battery power booster adapter) USB Bus Power: Low Battery Alert: Power-up Modes: Antenna: Range: Yes 15 minutes of life left Three (3) power-up modes (Stereo Line-in, Stereo Mic-in, Mono Mic-in) Two internal antennas Up to 100 ft (Range may be dependent on line of sight and may vary due to local conditions) 9 One (1) transmitter can re-route audio signal to eight (8) different receivers Yes (Wit
Wi AudioStream EL2 PRODUCT SPECIFICATIONS Wi Sure-Fit EL Technical Specifications Mechanical Specifications Ear Mount: Ear Placement: Boom Type: Cable Type: Sure-Fit™ Ergonomic Silicon Ear Mount Simple-Twist™ Left/Right Ear Placement Simple-Twist™ Bendable, Adjustable Length Boom with Locking Mechanism Simple-Twist™ Detachable Cables Omnidirectional Capsule MIC Specifications Model JM-ST35O (If specified by part number) Frequency Response: 20Hz to 20kHz Operating Current: Less than 500uA Operating Voltag
Wi AudioStream EL2 PRODUCT SPECIFICATIONS Wi Sure-Fit Lavalier Technical Specifications Unidirectional Capsule MIC Specifications Model JM-ST35U (If specified by part number) Frequency Response: Operating Current: Operating Voltage: Sensitivity: Maximum SPL: Output Impedance: Capsule Type: Element: Polar Pattern: 50Hz to 15kHz Less than 500uA 1.5V - 10V DC -51dB+/-4dB/Pascal 130 dB SPL max 1.5KΩ±30% Simple-Twist™ Removable 3.
Wi AudioStream EL2 FCC NOTICES Regulatory Compliance Information Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wi AudioStream EL2 RECYCLING INFORMATION Disposal and Recycling Information Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial waste for disposal.
Wi AudioStream EL2 PRODUCT WARRANTY Product Warranty Terms Wi Digital Systems warrants that the Wi AudioStream EL2 is free from material defects and faulty workmanship for a period of twelve (12) months from the date of purchase. Wi Digital Systems will repair or replace, at its option, any Product that breaches this warranty during said period.
Wi AudioStream EL2 PRODUCT WARRANTY Out of Warranty Should your Wi AudioStream EL2 not function properly after the warranty period has expired, please contact Wi Digital Systems Customer Care at www.customercare@widigitalsystems.
w w w.widigitalsystems.com © 2011 Wi Digital Systems by Jangus Music, Inc. All rights reserved. Wi, Stylized Wi and Jangus Music Logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. Wi AudioStream, Sure-Fit, Simple-Twist and Digital Wireless Stereo logo are trademarks of Jangus Music, Inc. All other trademarks included herein are the property of their respective owners. US and Foreign Patents Pending.
