Owner`s manual
20
TRANSMITTER MIC CONNECTION
Connecting The Microphone to The Transmitter
Connect the 1/8” TRS end of the microphone cable to
the audio output port of the Wi Transmitter.
For Mono MIC connection, ensure that the
Transmitter is set for
Mono Mic-In Mode
and the LED is in FAST blue ashing mode.
For Stereo MIC or Mono Redundancy MIC connection,
ensure that the Transmitter is set for
Stereo Mic-In Mode
and the LED is in SLOW blue ashing mode.
For Camcorders or DSLRs without microphone noise lter
circuit or limited MIC gain control capability set the Transmitter
to
Stereo Line-In Mode
. The blue LED will reect
TWO FAST ashes.
Refer to the “Tx Button Functions”
on page (50) for more details.
j
r
r
r
j
F
F
F
F
r