AudioStream Pro EL TM TM Pocket Portable Stereo Digital Wireless Earset, Lavalier & Audio Monitoring System OWNER’S MANUAL OPERATING INSTRUCTIONS
CONGRATULATIONS! Thank You For Choosing Wi Digital Systems. Congratulations on your purchase of the Wi AudioStream Pro EL Pocket Portable Stereo Digital Wireless Microphone, Lavalier & Audio Monitoring System with 2-Way Wireless USB 2.0 Audio Interface. Please thoroughly read this User’s Manual for all the feature operation information necessary to install and operate your new Wi AudioStream Pro EL system. Notice: Product specifications and package contents are subject to change without notice.
TABLE OF CONTENTS -----------------------------------------------------------------------------------------SUPPORT 4 TECHNICAL -----------------------------------------------------------------------------------------PACKING LIST 5 -----------------------------------------------------------------------------------------SYSTEM CHARGING & PAIRING 6 -----------------------------------------------------------------------------------------EARSET SETUP, FITTING & HANDLING 8 --------------------
TECHNICAL SUPPORT Getting Answers! We want you to get the most from your new Wi AudioStream Pro EL stereo digital wireless audio system! Simply logon to www.widigitalsystems.com and access the resources available online including instructional manuals and more. Our customer service support staff are ready to assist you with any question you may have. Your Wi AudioStream Pro EL comes with 90 days of telephone support and one year of service coverage.
PACKING LIST Wi Transmitter Wi Receiver Universal USB AC Charger 1/4”-20 Camera Hot Shoe & Clip 1/8” to 1/8” TRS Stereo Cable & 1/4” Adapter Wi Sure-Sound™ Earset with Wi Simple-Twist Unidirectional Detachable Microphone Capsule Single Feed Cable Clips 1/8” Stereo to 1/4” Stereo Y-split Cable Wi Simple-Twist™ Detachable Earset Cable Wi Sure-Sound™ Lavalier with Omnidirectional Microphone Capsule MIC/Headphone MIC Adapter Windscreens XLR to 1/8” TRS Cable USB Data Cable USB Y-Split Power Cable
CHARGING Charging The System AC Charger USB Connector Before using your new Wi AudioStream™ Pro digital wireless system, you need to fully charge the batteries for approximately 2 hours. 1. Plug the AC Charger into a power socket. 2. Connect the USB power cable to the USB port on the AC charger. 3. Connect one of the two mini USB connectors to the Transmitter USB port. 4. Connect the second mini USB connector to the Receiver USB port. 5. The Power/Status LED will turn to solid Red ON. 6.
PAIRING Pairing the Wi Transmitter & Receiver The Wi Transmitter and Receiver are paired at the factory. Perform the following steps ONLY if you need to reestablish connection between the Transmitter and the Receiver. r p (Tx) k 1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and holding the POWER button , on each of the units for 2 seconds. The green LED on Each unit will flash. kv p 2. Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
EARSET SETUP The Wi Sure-Sound Earset Delivering unmatched value, comfort, sound quality and secure fit, the Wi SureSound™ earset ultra-small removable MIC capsule mounted on an ultra-thin, rugged, bendable, adjustable length and incredibly lightweight boom captures vocals clearly with excellent rejection of wind and ambient noise. The Wi Sure-Sound™ earset is an excellent choice for pastors, artists, fitness instructors, speaking and singing performers, video camera miking and hard to MIC instruments.
EARSET SETUP Connecting The Earset Cable The Wi Sure-Sound™ series ultra-low-profile detachable cable delivers minimum visibility with maximum durability. Optional adapters give the Wi Sure-Sound™ series earset great flexibility for use with different wireless systems including AKG™, Shure™, Sony™, Audio-Technica™ and Sennheiser™. 1. Locate the detachable earset cable. 2. Fasten the earset end of the earset cable to the screw connector located on the silicon ear mount.
EARSET FITTING Left or Right Ear Placement 2. Rotate the boom 180 degrees to the preferred ear wearing preference. 3. Release the locking switch when rotation is complete. No need to rework the bend or reshape the boom again when switching from left to right ear placement. The boom maintains its original angle to capture vocals from the nearthe-mouth position, from the opposite side. 10 P 1. Press the boom locking switch located on the bottom of the Silicon ear mount.
EARSET FITTING Wearing the Wi Sure-Sound Earset The Wi Sure-Sound series advanced ergonomic Silicon ear-mount design delivers an unmatched comfortable fit in seconds while ensuring secure boom placement even when the head moves, or when used with glasses or other head-worn accessories. This ultra-lightweight MIC is incredibly easy to wear even for an extended time. 1. Pull the “C” shaped Sure-Sound silicon ear mount wide open and clip over the ear. 2.
EARSET FITTING Adjusting the Boom Length The Wi Sure-Sound series boom can easily be adjusted to the appropriate length and placement with a simple push of a button to capture the closest near-the-mouth vocals clearly and consistently. The boom locking mechanism keeps the boom securely in place to provide good gain and natural sound that doesn’t change when the head moves. D P 1. Press the boom locking switch located on the bottom of the Silicon ear mount. 2.
EARSET FITTING Adjusting the Boom Curve The Wi Sure-Sound series bendable boom can easily be adjusted to position the microphone tip as close as possible to the mouth for best vocal gain and clarity. Adjust the curvature of the boom only when necessary. If the microphone tip is away from the cheek, this will result in lower gain and more ambient noise. 1. Using the thumb and the index finger, curve the boom with a sliding motion to form the boom and get the curvature you require.
Positioning The Microphone Capsule 5 The Wi Sure-Sound series removable microphone capsule is located at the tip of the boom. The key to maximizing the sound quality is to locate the capsule as close as possible to the mouth without touching the face. 5 EARSET FITTING 5 1. Press the boom locking switch located on the bottom of the Silicon ear mount. 2. Slide the boom shaft to position the MIC capsule just behind the corner of your mouth when you are smiling.
EARSET FITTING Using The Earset/Lavalier Cable Clip The Wi Sure-Sound series comes with an Earset/ Lavalier cable clip to prevent movement of the cable from dislodging the earset. The clip is specifically designed to match the diameter of your cable, either 1.4mm or 2mm. 1. Locate the cable clip and gently pull the cable down into the rubber cable channel opening on the clip. 2.
EARSET HANDLING 3 Fasten the MIC capsule from the earset or lavalier MIC port by screwing in the MIC capsule clockwise until snug! Be certain not to overtighten. AVOID ACCIDENTAL CAPSULE THREAD STRIPPING! • Be certain to align the MIC capsule threads in a straight line • Be certain not to overtighten. 16 5 2. Align the MIC capsule threads in a straight line with earset or lavalier cable MIC port. Q 1.
EARSET HANDLING Handling The Wi Sure-Sound Earset Series The Wi Sure-Sound series is a high-precision instrument and is designed for durability and flexibility. The following are some of the basic precautions to prevent damage to the Wi Sure-Sound. Do not bend and wrap the cables in any way that O creates severe coiling or strain on the cables. detach the earset cable when storing the PAlways Wi Sure-Sound earset microphone.
LAVALIER FITTING Wi Sure-Sound Lavalier Wi Digital Systems ultra-small 3.1mm MIC capsule mounted on an ultra-thin rugged cable, captures vocals clearly with excellent rejection of wind and ambient noise. The crisp, high-quality Wi Sure-Sound™ Mono Lavalier microphone provides superb vocals and sound pick-up from all directions making it an excellent choice for video camera, camcorders, DSLRs, smartphones and tablets miking. Refer to the “Lavalier Specs” on F page (59) for more details.
LAVALIER FITTING Using The Lavalier Option The Wi Sure-Sound Lavalier easily accommodates alternative mounting applications such as: • Ties, Shirts, Jackets and Behind-the-Button Positioning • In-Hair • Beneath T-shirts & Blouses • Hard to MIC Instruments The included Lavalier cable clip can be used to customize the fit of the lavalier to be both comfortable and discreet.
TRANSMITTER MIC CONNECTION Connecting The Microphone to The Transmitter Connect the 1/8” TRS end of the microphone cable to the audio output port of the Wi Transmitter. j F F For Mono MIC connection, ensure that the Transmitter is set for Mono Mic-In Mode r and the LED is in FAST blue flashing mode. For Stereo MIC or Mono Redundancy MIC connection, ensure that the Transmitter is set for Stereo Mic-In Mode r and the LED is in SLOW blue flashing mode.
TRANSMITER PLACEMENT Transmitter Placement Designed for singers, performers, broadcasters, interviewers and active users, the Ultra-lightweight, 1.08 Oz discreet and unobtrusive Wi Transmitter can easily be attached to your belt, shirt, or even placed in your pocket without impeding your body movement. For best wireless performance we recommend mounting the Wi Transmitter on your belt to the side of your body.
RECEIVER CAMERA CONNECTION Using The 1/4”-20 Hot Shoe Camera Adapter The Wi Transmitter and Receiver are designed to mount video camera DSLR and handheld recorders. 1. Locate the 1/4”-20 Hot Shoe flash adapter for cameras, tripods and bipods. 2. Fasten the 1/4”-20 Hot Shoe flash adapter mounting screw to the belt clip 1/4”-20 nut and tighten the top lock ring. 3. Loosen the bottom lock ring on the 1/4”-20 Hot Shoe flash adapter camera accessory. 4.
RECEIVER CAMERA CONNECTION Audio Cable Connection 5 3. Insert the 1/8” TRS stereo end or the XLR end of the audio cable into the Camera MIC-IN or Line-In audio input jack. 5 1. Locate the 1/8” to 1/8” TRS stereo audio cable or the 1/8” to XLR TRS audio cable. Use the 1/8” TRS to XLR audio cable if your camera is equipped with XLR audio input ports. 2. Insert the 1/8” TRS stereo end of the audio cable into the Wi Receiver audio output jack.
RECEIVER MIXER CONNECTION Connecting The Receiver to Sound Systems The Wi AudioStream EL Pro is designed to connect to amps, mixers, live sound systems or powered speakers in minutes! Simply connect the ultra compact sized Receiver to the mixer, amplifier or powered speaker and you are done! For best audio sound quality and gain feedback control, we F recommend connecting the Wi Receiver to (2) two channels on the mixer or live sound system using the included 1/8” stereo male to 1/4” Y-split cable.
RECEIVER MIXER CONNECTION Audio Cable Connection 1. Locate the 1/8” stereo to 1/4” Y-split TRS cable or the 1/8” to XLR TRS audio cable that comes with the system. 2. Connect the 1/8” TRS end of the cable to the audio output port of the Receiver, then connect the left and right 1/4” TRS cable ends to the mixing console audio inputs. u Connect the XLR cable end to the MIC XLR port on the mixing console if you are using the mono XLR cable.
RECEIVER SMART DEVICE CONNECTION Connecting the Receiver to Smart Devices Analog Audio Port The Wi Receiver brings the convenience of hands-free digital wireless miking and freedom of movement to smartphones and tablets to transform these smart devices to powerful on-the-go Audio-Visual production tools.
RECEIVER SMART DEVICE CONNECTION Wi Receiver Connection Headphone Connection 5 5 1. Locate the 1/8” to 1/8” stereo audio cable and the MIC/Headphone adapter. 2. Insert the 1/8” TRS stereo end of the audio cable into the Wi Receiver audio output jack. 3. Insert the 1/8” TRS stereo end of the headphone cable into the Headphone port on the MIC/Headphone adapter. 4. Insert the 1/8” TRS stereo end of the Receiver cable into the Microphone port on the MIC/Headphone adapter. 5.
AUDIO MONITORING Audio Monitoring The Wi AudioStream Pro EL is designed to provides freedom of wireless movement to any conventional headphones or in-ear personal monitors making it an ideal system for audio listening and monitoring applications. You can wirelessly listen to your music from live sound system, MAC, PC, smart device or any audio source by connecting the Wi Transmitter to your audio source and your headphones or in-ear personal monitors to the Wi Receiver.
AUDIO MONITORING Headphone & In-Ear Personal Monitors Setup PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the Wi Transmitter to your audio source using one of the included stereo audio cables that best fit your audio source audio port jack. 2.
WIRELESS USB AUDIO INTERFACE 2-Way Wireless USB 2.0 Audio Interface The 2-Way wireless USB 2.0 audio interface enables users to wirelessly connect microphones and In-ear monitors to iPad®, Windows Surface®, Tablet PC, MAC and PC computers for untethered simultaneous two-way 2.
WIRELESS USB AUDIO INTERFACE Wireless USB Audio Interface Features List: The amazing 2-Way wireless USB 2.0 audio interface features special circuitry designed to deliver professional digital wireless audio I/O performance along with low latency USB 2.0 performance. • Wirelessly connect your iPad®, Windows Surface®, Tablet PC, MAC and PC to studio gear or professional on-stage audio systems such as DJ gear, audio mixers, powered speakers/monitors, amplifiers and live sound systems in minutes.
MAC USB SETUP 5 1. Locate the included USB data cable. 2. Make suer that the Transmitter and the Receiver are turned OFF. 3. Insert the mini USB end of the USB data cable into the Wi Transmitter USB audio interface port located on the side of the Transmitter. 4. Insert the full size USB end of the USB data cable into your Mac laptop or desktop USB port. 5. Power up the Transmitter and the Receiver.
MAC USB SETUP Configuring The Audio Ports On Your Mac 1. To select the Wi Transmitter as the computer’s audio output, open the System Preferences from the dock or the main Apple Menu. 2. Open the Sound preferences then choose the output tab and select Wi AudioStream Pro. 3. Adjust the Output volume slider at the bottom of the Sound dialog box to the maximum setting. Use the Wi AudioStream Pro Receiver’s volume controls to control the overall output volume for the headphones or speakers. 4.
PC USB SETUP 34 5 1. Locate the included USB data cable. 2. Make sure that the Transmitter and the Receiver are turned OFF. 3. Insert the mini USB end of the USB data cable into the Wi Transmitter USB audio interface port located on the side of the Transmitter. 4. Insert the full size USB end of the USB data cable into your laptop or desktop USB port. 5. Power up the Transmitter and the Receiver. 6. Windows will recognize the Wi Transmitter and automatically install the universal driver.
PC USB SETUP Windows 7/Vista/XP Optional Settings 1. Setting the Wi Transmitter as your default audio device To set the Wi Transmitter as your default device for sound playback and recording, or to change its settings, click the Start button, click Control Panel and then click Sound. Under the Playback and Recording tabs, you can select the Wi AudioStream Pro from the menus and use the Set Default button to set it as the default device. 2.
iPad USB SETUP Apple Optional USB Camera Adapters Connecting to Your iPad The optional Apple Lightning to USB Camera adapter Model MD821ZM/A or 30-pin to USB Camera adapter Model MC531ZM/A is required to set up your Wi AudioStream Pro with iPad. Note: Before using the Wi AudioStream Pro with your iPad, you need to fully charge the Transmitter batteries. Your iPad will display the message “The attached acessory uses too much power” if the Transmitter is not fully charged. 1.
SURFACE & TABLETPC USB SETUP 1. Locate the included USB data cable. 2. Make sure that the Transmitter and the Receiver are turned OFF. 3. Insert the mini USB end of the USB data cable into the Wi Transmitter USB audio interface port located on the side of the Transmitter. 4. Insert the full size USB end of the USB data cable to your Windows Surface or Tablet PC USB port. 5. Power up the Transmitter and the Receiver. 6.
USB AUDIO LISTENING Headphone & In-Ear Personal Monitors Setup PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). • You can wirelessly listen to your iPad®, Windows Surface®, Tablet PC, MAC and PC computers music by connecting your headphones or in-ear personal monitors to the Wi Receiver.
USB VoIP & PODCASTING 5 5 USB VoIP and Podcasting Your MIC is probably the most important part of your setup. For VoIP application, typical headphones equipped with a microphone are sufficient. Simply plug in your headphones equipped with a microphone to the Receiver and get started. Microphone Connection Headphone Connection 5 For Podcasting, you will need a good set of monitors when you’re recording to monitor yourself as well as hear your guests.
SMART DEVICE DIRECT MIC CONNECTION Connecting The Earset/Lavalier Directly into Smart Devices Analog Audio Port Designed for quick and on-the-go microphone setups, this powerful system provides the convenience of connecting the included professional grade Wi SureSound earset and lavalier directly into your iPhone, iPod, iPad, Windows Surface, Tablet PC or any Smartphone Headphone/MIC audio input jack to capture superb vocals and amazing ambient sounds easily and acurately while providing audio monitoring f
SMART DEVICE DIRECT MIC CONNECTION 5 5 Using The MIC/Headphone Adapter to Mount The Receiver to Smart Device 1. Locate the Wi Sure-Sound Earset or Lavalier, and the MIC/Headphone adapter included in the kit. Wi Receiver Connection Headphone Connection 5 2. Insert the 1/8” TRS stereo end of the earset or lavalier into the MIC port on the MIC/Headphone adapter. 3. Insert the 1/8” TRS stereo end of your headphone cable into the headphone port on the MIC/Headphone adapter. 4.
TRANSMITTER FEATURES Transmitter Controls and Connections j Audio IN Jack: Provides mono and stereo connection for your microphone or other line level sound source. k Power ON/OFF: Press and hold the Power button for 2 seconds to turn the Transmitter ON or OFF. l Power/Status LED: m Volume UP: n Volume DOWN: 42 Displays the status of six functions: ON/OFF, Battery Charging, Low Battery, Pairing, Mute, Operating and Lock Modes.
TRANSMITTER FEATURES o Mute: p Link/Pair: Press and hold for 1.5 seconds to mute or un-mute the audio. The Link button performs two functions: Pairing and Linking. Pairing allows the Transmitter to connect and communicate with the Receiver. Press and hold for 3 seconds until the green LED displays fast flashes, indicating that it is ready to pair with a Receiver. Once the Transmitter links with the Receiver, the LED on both devices will turn solid green.
TRANSMITTER FEATURES q Lock: r Mode: Press and hold for 2 seconds to lock the function key pads on the Transmitter and the Receiver to preserve all settings and prevent accidental triggering of the function buttons during operation. Press once to unlock the Transmitter and Receiver function key pads and restore normal operation.. Press and hold for 2 seconds to select the desired operation indicated by the following blue LED flashing sequence.
TRANSMITTER FEATURES r 11 s USB 2.0 Audio Interface & Charging Port: This is a mini USB 2.0 Plug-and-Play wireless audio interface for iPad®, Windows Surface®, Tablet PC, MAC and PC. This is also a mini USB power connection to power up and charge the internal batteries. The Transmitter can be charged using the supplied universal AC charger, via an instrument or computer USB port, or the optional AA battery power booster adapter.
RECEIVER FEATURES Receiver Controls and Connections u Audio I/O Jack: v Power ON/OFF: w Power/Status LED: x Volume UP: y Volume DOWN: 46 Stereo/Mono audio output and mono MIC input port connection for professional Sound Systems, In-Ear Monitors, Microphones and more... u | Press and hold for 2 seconds to turn the Receiver ON or OFF. Displays the status of six functions: ON/OFF, Battery Charging, Low Battery, Pairing, Mute and Lock mode.
RECEIVER FEATURES z Link/MIC: This multifunction button performs the Pairing and VoIP MIC muting. Pairing allows the Receiver to be discovered by the Transmitter. Press and hold the Link button for 3 seconds until the green LED displays fast flashes, indicating that it is ready to pair with a Transmitter. Once the Transmitter links with the Receiver, the LED on both devices will turn solid green.
RECEIVER FEATURES } Mute/Pause/Play: Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio. Press once to pause or play an audio track. This function will remotely control the media player or sequencing software functions. ~ MIC: Press the LINK / MIC button once to mute the Microphone. The Blue LED on the Receiver will turn ON when the MIC is on mute. Press the LINK / MIC button again to unmute the Microphone.
RECEIVER FEATURES 11 Charging Port: s } ~ 12 This is a mini USB connection to power up and charge the internal batteries. The Receiver can be charged using the supplied universal AC charger, via an instrument or computer USB port, or the optional AA battery power booster adapter. 12 Belt Clip: The Transmitter can be attached to belts, shirts and pants’ pockets. The compact and lightweight design is easy to wear without impeding body movement.
Tx BUTTON FUNCTIONS Transmitter (Tx) Button Functions Function Button Activation Hold Time LED Status 2 sec Solid Green k POWER Press and Hold Press and Hold 3 sec Fast Green Flashes Pairing Mode p LINK Click for Step, Press and hold for Auto Click Volume UP/Down mn Mute ON/OFF Press and Hold 1.
Tx LED INDICATOR CHART Transmitter (Tx) LED Indicator Chart Function Searching For Receiver Linked to Receiver Lock Mode Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status l l l l l l l Flashing Green Solid Green Solid Green Only Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF r o n q p l m k 51
Rx BUTTON FUNCTIONS Receiver (Rx) Button Functions Function Button Activation Hold Time LED Status 2 sec Solid Green v POWER Press and Hold Press and Hold 3 sec Fast Green Flashes Pairing Mode z LINK LINK/MIC Click Click Two Blue LED Flashes MIC Mute On/Off z / Solid Green LED Power ON/OFF xy } Play/Pause } Next Track { Prev Track | Volume UP/Down Click for Step, Press and Hold for Auto Click Mute ON/OFF Press and Hold 1.
Rx LED INDICATOR CHART Receiver (Rx) LED Indicator Chart Function Searching For Transmitter Linked to Transmitter Key Pad Lock Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status w w w w w w w Flashing Green Solid Green Solid Green (Activated by Tx) Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF | } y { z w x v 53
SYSTEM SPECIFICATIONS Wi AudioStream Pro EL Technical Specifications Specifications Transmission Format: 2.4 GHz, 16-bit, 48kHz Digital Wireless 15Hz to 20kHz Frequency Response: Auto select Frequency Selection: More than 90 dB (A-weighted) for stereo line-in mode S/N Ratio: More than 89 dB (A-weighted) for stereo and mono MIC mode Distortion: 0.12 % THD 1/8” (3.5mm) TRS Stereo Connectors: 1Vrms Max Input Level: 1.2Vrms Max Output Level: Input Impedance: 3.
SYSTEM SPECIFICATIONS Specifications Battery Power Booster: 10~13 hours (With optional AA battery power booster adapter) USB Bus Power: Low Battery Alert: Power-up Modes: Antenna: Range: Units operating at the same time: USB 2.0 Audio Interface: Apple OS Support: Windows OS Support: Compatibility: VoIP Capable: 802.
MICROPHONES FEATURES j Lavalier MIC: k Earset MIC: l Boom: m Silicon Spacer: n Boom Lock: o Cable Port: p Ear Mount: 56 Sure-Sound™ lavalier omnidirectional microphone. Sure-Sound removable unidirectional microphone capsule. Sure-Fit bendable boom design. Silicon cheek spacer. Adjusting the boom length, left and right ear placement boom configuration and keeping boom securely in place. Simple-Twist detachable cable port. Sure-Fit advanced ergonomic Silicon ear mount.
MICROPHONES FEATURES p j o n m l k 57
EARSET SPECIFICATIONS Wi Sure-Sound Earset Technical Specifications Unidirectional Capsule MIC & Mechanical Specifications Ear Mount: Sure-Fit™ Ergonomic Silicon Ear Mount Simple-Twist™ Left and Right Ear Placement Ear Placement: Simple-Twist™ Bendable, Adjustable Length Boom with Boom Type: Locking Mechanism Simple-Twist™ Detachable Cables Cable Type: 50Hz to 15kHz Frequency Response: Operating Current: Less than 500uA Operating Voltage: 1.
LAVALIER SPECIFICATIONS Wi Sure-Sound Lavalier Technical Specifications Omnidirectional Capsule Lavalier Specifications Frequency Response: 20Hz to 20kHz Less than 500uA Operating Current: Operating Voltage: 0.8V - 5V DC Sensitivity: -32dB+/-4dB/Pascal 140 dB SPL max Maximum SPL: 2KΩ±30% Output Impedance: 3.
REGULATORY COMPLIANCE Regulatory Compliance Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RECYCLING INFORMATION Disposal and Recycling Information Correct Disposal This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial waste for disposal.
PRODUCT WARRANTY Product Warranty Terms Wi Digital Systems warrants that the Wi AudioStream Pro EL is free from material defects and faulty workmanship for a period of twelve (12) months from the date of purchase. Wi Digital Systems will repair or replace, at its option, any Product that breaches this warranty during said period.
PRODUCT WARRANTY Out of Warranty Should your Wi AudioStream Pro EL not function properly after the warranty period has expired, please contact Wi Digital Systems Customer Care at www.customercare@widigitalsystems.
w w w.widigitalsystems.com 2013 Wi Digital Systems, Inc. All rights reserved. Stylized Wi logo is a registered trademark of Wi Digital Systems, Inc. in the United States and may be a registered trademark in other countries. Wi, Digital Wireless Stereo logos and Wi AudioStream, Wi Sure-Sound, Wi Sure-Fit, Wi Sure-Ears, Wi Micro-In-Ear are trademarks of Wi Digital Systems, Inc. All other trademarks included herein are the property of their respective owners. US and Foreign Patents Pending.
