User`s manual
OSD
-
FUNCTION SETUP > GROUP SETUP
41
2
GROUP SETUP
The group function allows you to run sequence of presets, pattern,
and/or scans. Maximum 8 group can be stored. Each group can
have
max 20 action entities which can be preset, pattern, or scan.
The preset speed and the repeat number of pattern & scan can
be set in group setup. Dwell time between actions can also be
adjusted.
EDIT GROUP - Initial Screen
Press Near or Enter key in “NO” list to start group setup.
EDIT GROUP – Select Function Sequence
Note that maximum 20 functions are allowed in a group.
Move cursor up/down and press Near or Enter key to set.
EDIT GROUP - Assign Function
Set up ACTION, DWELL and OPT. Note that selected item is
displayed in reverse. Move cursor left/right to select items and
move cursor up/down to change each value.
GROUP NO.
Selects group number to edit. If a selected group number is not
defined, “UNDEFINED” will be displayed under the selected group
number.
CLEAR GROUP
Deletes the data in the current group.
<EDIT GROUP>
Starts editing group.
1 ~ 8
CANCEL / OK
ACTION NO.
DWELL TIME
Sets dwell time between function by moving joystick up/down.
OPT
Represents preset speed (2~360) when preset is selected. It should
be the number of repetition (1~255) when pattern or scan is
selected for “ACTION.”
NONE / PRESET 1~128(Excluding 95) /
PATTERN 1~4 / SCAN 1~4
00:03 ~ 04:00 (min:sec)
PRESET: 2~360 / PATTERN & SCAN: 1~255
Preset
1
Preset
120
Pattern5
1 Times
Pattern5
n Times
Dwell Time
Max. 20 Entities
Scan3
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
GROUP SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
GROUP NO.
CLEAR GROUP
<
EDIT GROUP>
BACK
EXIT
1
UNDEFINED
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL [NEAR:EDIT]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT ACT]
[FAR :EDIT END]
Select <EDIT GROUP>,
Press Near/Enter Key
> > > >
[ :
MOVE CURSOR
]
[ : CHANGE VAL.]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
3
4
5 6
5
1
2
4
3