User guide



GOLANTECH T: + 9 7 2 -3 -6969690 |F: [phone]
Motion Activated DVR, PIR Video Recorder (DSD-1084)
Features:
H.264 compression
Automatic PIR motion detection to power on/off
PIR mode to enormously prolong mission standby time
Standby time 700 hours in PIR mode
Quick boot up to recording @ 2 seconds
Hi-resolution 720x240/720x288
Record and playback up to 25fps(PAL)
Recording frame rate / video quality selectable
Schedule Continuous/ PIR recording mode/ Panic mode
Time/Date stamp on video recording
Daylight saving time supported
Micro SD card supporting SDXC (64GB~2TB)
Special designed proprietary software
Software backup format selectable at DVR/ AVI/WMV/JPG
OSD menu operating with IR-remote controller
Content: Main unit , Remote control, Cable
accessories, CD-ROM (included User Manual ,
bundled software)
Specifications:
Video Compression H.264/JPEG
Video System NTSC/PAL (Auto detect)
Video Resolution 720x240 (NTSC) / 720x288 (PAL)
Frame Rate Per Second 2, 4, 6/8, 13/15, 25/30fps
Video Recording Mode Schedule Continuous/ PIR recording mode
Pre-recording Supported in standby time (PIR mode)
Post recording Supported in PIR mode
Video Quality Low, Standard, High, Super
Audio recording Yes
Time/Date Stamp Yes
Daylight saving time Yes
Power Supply 12V DC/ Battery 5V input
Storage Media Micro SD card, SDHC & SDXC (64GB~2TB) supported
Control IR remote control
LED and Buzzer Yes
Current Consumption 120mA (12V) in standby mode (main board only, without camera)
Firmware Upgradeable Yes, through Micro SD card
Playback recording via device itself or bundled software on PC
Playback search By Time or Event
Operating Temperature 0~+50°C
Dimensions 60x60mm