Technical data

BIOS and System Programming
CP 486 ⋅ 00/14 VIPA GmbH 61
4.2.3 QUADTEL-BIOS-Setup
The BIOS Setup has the following setup possibilities (shown are the default setups):
In the BIOS-Setup the following system parameters can be set up:
-date
- time
- password for system startup
- type of floppy disk drive 1 (360KB, 720KB, 1.2MB, 1.44MB)
- type of floppy disk drive 2 (360KB, 720KB, 1.2MB, 1.44MB)
- type of the hard disk 1 (1 .. 47)
- type of the hard disk 2 (1 .. 47)
- type of the video interface
- size, type and system memory segmentation
- shadow-RAM for system-BIOS
- shadow-RAM for VGA-BIOS
The setup should be modified only by experienced users. Normally, it is not necessary to intervene
in the system setup.
The control keys for the SETUP are displayed in the lower part of the screen. By pressing the <F1>
key you get help information. The displayed configuration is stored with the <F10> key, you return
from the BIOS Setup to the menue with the <ESC> key.