Technical data

Hardware
CP 486 ⋅ 00/14 VIPA GmbH 19
Structure of CP486ML (VIPA Order-No. CP4-BG63):
- CPU80486SLC and base for FPU80387SX
- main memory 4MB (CP4-BG63)
- keyboard interface connection
- VGA graphics
- slot for interface to flat displays
- 2 serial interfaces COM1 (V24), COM2 (20mA) (see also chapter 1.5)
- 3,5" floppy disk drive (720KB/1,44MB)
- 1 parallel interface (LPT1)
- slot for hard disk
- base for silicon disk (2 memory chips)
- slot for silicon disk (memory card)
- removable 16bit AT bus with 1 slot
- 8K Dual-Port-RAM to PLC as CP interface
Operation and display elements on the front panel:
- one 15-pin HD Cannon socket for monitor connectionn
- two 9-pin Cannon sockets for COM1 (V24), COM2 (20mA),
- one DIN socket for standard AT keyboard and sym. line driver up to 250m
- parallel interface LPT1, Centronics-compatible with 25-pin Cannon socket
- plug clamp for external 24V DC power supply for an EL display or using the
keyboard extension
- LED display (red) for displaying an accumulated error (can be deleted by
pressing a RESET key)
- RESET key
- one 15-pin HD Cannon socket for diagnostic interface
- one 3,5" floppy disk drive
- an opening for AT cards