User`s manual

CAMERA SETUP > SPECIAL (HLC/ DNR)
OSD -
1
2
2
DNR
If reduces the noise caused by ‘AGC’ action. If set to AUTO or MANUAL,
the noise will be reduced but the ghost effect on moving objects will
be increased. If enabled, select the apropriate level from 1~10.
DETAIL
Selects if the sub screen will be displayed. Sub screen will be displayed
on the bottom of the right side. Even though the main image enables
the digital zoom, the sub screen will only display with maximum optical
zoom.
HR(High Resolution)
This mode enhances edges and produces higher definition images.
HLC
Part where becomes brightness more than the standard value is
automatically hid by mask on the video.
SPECIAL
Sets the special function relaced to the image.
SPECIAL
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DNR
DETAIL
HR
HLC
BACK
EXIT
OFF
5
OFF
OFF
Press Near/Enter Key
ZOOM CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
FLICKERLESS
<
WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
<SPECIAL>
BACK
EXIT
SEMIAUTO
ON
OFF
OFF
This setup is not supported on some models.
36